Skip to content

Publications

Scientific Journal Publications

Conferences

  • Dzikowski, M., 2013, "Single Component Multiphase Lattice Boltzmann method for tribological flow computations", ICCMES 2013, Oxford
  • Dzikowski, M., Rokicki, J., Antoszewski, B., 2013, "Lattice boltzmann method for multiphase flow in face seals", X Workshop "Modelling of Multiphase Flows in Thermo-Chemical Systems", Gdańsk
  • Dzikowski, M., Rokicki, 2013, "Lattice Boltzmann method for multiphase tribological flow computations , ECCOMAS PARTICLES 2013, Stuttgart
  • Dzikowski, M., Rokicki, J., 2013. "Metoda Gazu sieciowego Boltzmanna w symulacjach przepływów trybologicznych ze zmianą fazy", Terotechnologia, Kielce
  • Dzikowski, M., Rokicki, J. 2014, "Lattice Boltzmann method as a fine scale solver in multiscale method modeling surface texture , ECCOMAS CFD 2014
  • Dzikowski, M., Rokicki, J. 2014, "Lattice boltzman method for multiphase tribological flows", KKMP 2014
  • Dzikowski, M., Rokicki, J. 2015, "Accuracy of Lattice Boltzmann Method in application to multiphase tribological flows", 3rd PCM & 21st CMM 2015
  • Dzikowski, M., Rokicki, J. 2015, "Reliability of the interaction potential based Lattice Boltzmann method for multiphase tribological flows", PARTICLES 2015, Barcelona
  • G. Gruszczyński, 2016, "Adjoint Lattice Boltzmann Method for Optimal Control" European Postgraduate Fluid Dynamic Conference, Warsaw.
  • Dąbrowski M., Dzikowski M., Jasiński Ł., and Olkiewicz P. , 2017, "Numerical modeling of multiphase flow in rough and propped fractures", EGU2017, Wiedeń
  • Dzikowski M. and Dąbrowski M., 2017, "Viscosity and surface tension effects during multiphase flow in propped fractures", EGU2017, Wiedeń
  • Gruszczyński G., Łaniewski-Wołłk Ł., 2018 "Modelling of immiscible multiphase flows using phase-field, Cascaded Lattice Boltzmann Method", 16th Multiphase Flow Conference and Short Course, Helmholtz Zentrum Dresden-Rossendorf, Dresden.
  • Gruszczyński G., Łaniewski-Wołłk Ł., 2019, "Numerical modelling of Super Hydrophobic Surfaces Using Lattice Boltzmann method (Poster)" XIII Multiphase Workshop and Summer School, The Szewalski Institute of Fluid-Flow Machinery Polish Academy of Sciences (IMP PAN), Wieżyca.
  • G.Gruszczyński, Ł. Łaniewski-Wołłk, 2020 "Application of thermal Cascaded Lattice Boltzmann Method to 3D simulations in a high Prandtl number regime (Poster)", The Fourth Spring School on Lattice Boltzmann Methods, 2020, Berlin
  • Dzikowski M. and Gruszczyński G., "Templated CUDA Lattice Boltzmann Method: generic CFD solver for single and multi-phase problems.", Supercomputing Frontiers Europe 2020, 2020, Warsaw
  • Gruszczyński G., Dzikowski M. and Łaniewski-Wołłk Ł., 2021 "On recovering the second-order convergence of the lattice Boltzmann method with reaction-type source terms", 17th International Conference for Mesoscopic Methods in Engineering and Science (ICMMES 2021), Tunis

PhD Thesis

Warsaw University of Technology

The University of Queensland

MSc and BSc Works

Warsaw University of Technology

  • T. Gajek, Symulacja komputerowa przepływu przez górne drogi oddechowe metodą Lattice Boltzmann (promotor: J. Szumbarski)
  • G. Gruszczyński, Optimal Control using the Adjoint Lattice Boltzmann Method (promotor: J. Szumbarski)
  • P. Obrępalski, Simulation of car aerodynamics using Lattice Boltzmann method (promotor: Ł. Łaniewski-Wołłk)
  • D. Sashko, Simulation of turbulent flows with cummulant Lattice-Boltzman method (promotor: Ł. Łaniewski-Wołłk)
  • R. Lenartowicz, Influence of uncertainty of initial conditions in a flapping wing simulation (promotor: Ł. Łaniewski-Wołłk)

The University of Queensland

  • D. Lightbody, Computational Modelling of Arterial Plaque Rupture using Coupled Lattice Boltzmann and Discrete Element Methods (supervisor: C. Leonardi)
  • W. Martin, Computational Modelling of Particle Straining in Porous Media (supervisor: C. Leonardi)
  • R. Dendle, Computational Modelling of Proppant Embedment \& Fracture Permeability in Queensland Coal Seams (supervisor: C. Leonardi)
  • L. O'Loughlin, Direct Numerical Simulation of CO2 Sequestration at the Pore Scale (supervisor: C. Leonardi)
  • B. Hill Computational Modelling of Pulsatile Blood Flow (supervisor: C. Leonardi)

Projects and Grants

  • ShaleSeq: Multidisciplinary project for carbon capture and storage analysis for Pomeranian shales

  • MapMoPS: Pre-Exascale project for particle simulations at the University of Queensland and POWSEY supercomputing center.

  • IDUB against COVID-19 "Modelling of epidemic spreading with Lattice Boltzmann Method"

  • IDUB POB III "Wysokowydajny model numeryczny wspierający analizę danych tomograficznych.

Computing Power Grants

PL-GRID infrastructure (PL)

TCLB was actively developed and extended on the infrastructure of Cyfronet, in the grants: clb, clb2, clb3, clb2016, clb2017, clb2018, clb2019, clb2020, clb2021.

ICM UW infrastructure (PL)

TCLB was actively developed and extended on the infrastructure of Interdisciplinary Centre for Mathematical and Computational Modelling, University of Warsaw, in the grants: GR80-12, GR83-20.

PAWSEY infrastructure (AU)

TCLB was developed and tuned for the Cray architecture as part of computing power grants awarded to the team of Christopher Leonardi (UQ).

Pawsey Centre for Extreme Readiness (AU)

TCLB was selected for development for extreme-scale computing in the project Massively parallel models of particle suspensions.

National Computational Infrastructure (AU)

TCLB was heavily used on the infrastructure at National Computational Infrastructure (NCI), in the grants: aa83, cz84.